READ Free Dumps For Cisco- 200-125
| Question ID 13641 | What command sequence will configure a router to run OSPF and add network 10.1.1.0
/24 to area 0?
|
| Option A | router ospf area 0 network 10.1.1.0 255.255.255.0 area 0
|
| Option B | router ospf network 10.1.1.0 0.0.0.255
|
| Option C | router ospf 1 network 10.1.1.0 0.0.0.255 area 0
|
| Option D | router ospf area 0 network 10.1.1.0 0.0.0.255 area 0
|
| Option E | router ospf network 10.1.1.0 255.255.255.0 area 0
|
| Option F | router ospf 1 network 10.1.1.0 0.0.0.255
|
| Correct Answer | C |
Explanation Explanation: ✑ Enabling OSPF SUMMARY STEPS 1. enable 2. configure terminal 5. end DETAILED STEPS Command or Action Purpose Step 1 Enable Example: Device> enable Enables privileged EXEC mode. ✑ Enter your password if prompted. Step 2 Configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 Example: Device(config)# router ospf 109 Enables OSPF routing and enters router configuration mode. Step 4 Example: Device(config-router)# network 192.168.129.16 0.0.0.3 area 0 Defines an interface on which OSPF runs and defines the area ID for that interface. Step 5 End Example: Device(config-router)# end Exits router configuration mode and returns to privileged EXEC mode. Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/12- 4t/iro-12-4t-book/iro-cfg.html#GUID-588D1301-F63C-4DAC-BF1C-C3735EB13673
| Question ID 13642 | A network administrator needs to allow only one Telnet connection to a router. For anyone
viewing the configuration and issuing the show run command, the password for Telnet
access should be encrypted. Which set of commands will accomplish this task?
|
| Option A | service password-encryption access-list 1 permit 192.168.1.0 0.0.0.255 line vty 0 4 login password cisco access-class 1
|
| Option B | enable password secret line vty 0 login password cisco
|
| Option C | service password-encryption line vty 1 login password cisco
|
| Option D | service password-encryption line vty 0 4 login password cisco
|
| Correct Answer | C |
Explanation Explanation: Only one VTY connection is allowed which is exactly what's requested. Incorrect answer: command. line vty0 4 would enable all 5 vty connections.