AllExam Dumps

DUMPS, FREE DUMPS, VCP5 DUMPS| VMWARE DUMPS, VCP DUMPS, VCP4 DUMPS, VCAP DUMPS, VCDX DUMPS, CISCO DUMPS, CCNA, CCNA DUMPS, CCNP DUMPS, CCIE DUMPS, ITIL, EXIN DUMPS,


READ Free Dumps For Cisco- 300-135





Question ID 15427

Scenario:
You have been asked by your customer to help resolve issues in their routed network.
Their network engineer has deployed HSRP. On closer inspection HSRP doesn't appear to
be operating properly and it appears there are other network problems as well. You are to
provide solutions to all the network problems.

The following debug messages are noticed for HSRP group 2. But still neither R1 nor
R2 has identified one of them as standby router. Identify the reason causing the
issue.
Note: only show commands can be used to troubleshoot the ticket.
R1#
'Mar 26 11:17:39.234: HSRP: Et1/0 Grp 2 Hello out 172.16.20.2 Active pri 100 vIP
172.16.20.254
'Mar 26 11:17:40.034: HSRP: EtO/0 Grp 1 Hello out 172.16.10.2 Active prj 130 vIP
172.16.10.254
R1#
'Mar 26 11:17:40.364: HSRP: EtO/0 Grp 1 Hello in 172.16.10.1 Standby pri 100 vIP
172.16.10.254
R1#
'Mar 26 11:17:41.969: HSRP: Et1/0 Grp 2 Hello out 172.16.20.2 Active pri 100 vIP
172.16.20.254
'Mar 26 11:17:42.719: HSRP: EtO/0 Grp 1 Hello out 172.16.10.2 Active prj 130 vIP
172.16.10.254
'Mar 26 11:17:42.918: HSRP: EtO/0 Grp 1 Hello in 172.16.10.1 Standby pri 100 vIP
172.16.10.254
R1#
'Mar 26 11:17:44.869: HSRP: Et1/0 Grp 2 Hello out 172.16.20.2 Active pri 100 vIP
172.16.20.254
'Mar 26 11:17:45.485: HSRP: EtO/0 Grp 1 Hello out 172.16.10.2 Active prj 130 vIP
172.16.10.254
'Mar 26 11:17:45.718: HSRP: EtO/0 Grp 1 Hello in 172.16.10.1 Standby pri 100 vIP
172.16.10.254
R1#
'Mar 26 11:17:47.439: HSRP: Et1/0 Grp 2 Hello out 172.16.20.2 Active pri 100 vIP
172.16.20.254
'Mar 26 11:17:48.252: HSRP: EtO/0 Grp 1 Hello in 172.16.10.1 Standby pri 100 vIP
172.16.10.254
'Mar 26 11:17:48.322: HSRP: EtO/0 Grp 1 Hello out 172.16.10.2 Active prj 130 vIP
172.16.10.254
R1#
'Mar 26 11:17:50.389: HSRP: Et1/0 Grp 2 Hello out 172.16.20.2 Acti

Option A

HSRP group priority misconfiguration

Option B

There is an HSRP authentication misconfiguration

Option C

There is an HSRP group number mismatch

Option D

This is not an HSRP issue: this is DHCP issue.

Option E

 The ACL applied to interface is blocking HSRP hello packet exchange

Option F

Answer : E

Explanation: On R1 we see that access list 102 has been applied to the Ethernet 1/0 interface:

Correct Answer F
Explanation


Question ID 15428

Scenario:
You have been asked by your customer to help resolve issues in their routed network.
Their network engineer has deployed HSRP. On closer inspection HSRP doesn't appear to
be operating properly and it appears there are other network problems as well. You are to
provide solutions to all the network problems.

You have received notification from network monitoring system that link between R1 and
R5 is down and you noticed that the active router for HSRP group 1 has not failed over to
the standby router for group 1. You are required to troubleshoot and identify the issue.

Option A

There is an HSRP group track command misconfiguration

Option B

There is an HSRP group priority misconfiguration

Option C

There is an HSRP authentication misconfiguration

Option D

There is an HSRP group number mismatch

Option E

This is not an HSRP issue; this is routing issue.

Option F

Answer : A

Explanation: When looking at the HSRP configuration of R1, we see that tracking has been enabled, but that it is not tracking the link to R5, only the link to R2:

Correct Answer F
Explanation

Send email to admin@getfreedumps for new dumps request!!!