AllExam Dumps

DUMPS, FREE DUMPS, VCP5 DUMPS| VMWARE DUMPS, VCP DUMPS, VCP4 DUMPS, VCAP DUMPS, VCDX DUMPS, CISCO DUMPS, CCNA, CCNA DUMPS, CCNP DUMPS, CCIE DUMPS, ITIL, EXIN DUMPS,


READ Free Dumps For Cisco- 300-135





Question ID 15421

A customer network engineer has made configuration changes that have resulted in some
loss of connectivity. You have been called in to evaluate a switch network and suggest
resolutions to the problems.

PC2 in VLAN 200 is unable to ping the gateway address 172.16.200.1; identify the issue.

Option A

VTP domain name mismatch on SW4

Option B

 VLAN 200 not configured on SW1

Option C

VLAN 200 not configured on SW2

Option D

VLAN 200 not configured on SW4

Option F

Answer : C

Explanation: By looking at the configuration for SW2, we see that it is missing VLAN 200, and the switchport access vlan 200 command is missing under interface eth 0/0:

Correct Answer F
Explanation


Question ID 15422

A customer network engineer has made configuration changes that have resulted in some
loss of connectivity. You have been called in to evaluate a switch network and suggest
resolutions to the problems.

Refer to the topology.
SW1 Switch Management IP address is not pingable from SW4. What could be the issue?

Option A

Management VLAN not allowed in the trunk links between SW1 and SW4

Option B

Management VLAN not allowed in the trunk links between SW1 and SW2

Option C

 Management VLAN not allowed in the trunk link between SW2 and SW4

Option D

Management VLAN ip address on SW4 is configured in wrong subnet 

Option E

Management VLAN interface is shutdown on SW4

Option F

Answer : D

Explanation: In the network, VLAN 300 is called the Management VLAN. Based on the configurations shown below, SW1 has VLAN 300 configured with the IP address of 192.168.10.1/24, while on SW4 VLAN 300 has an IP address of 192.168.100.4/24, which is not in the same subnet.

Correct Answer F
Explanation

Send email to admin@getfreedumps for new dumps request!!!