READ Free Dumps For Cisco- 300-101
| Question ID 7679 | What are the three modes of Unicast Reverse Path Forwarding? |
| Option A | strict mode, loose mode, and VRF mode |
| Option B | strict mode, loose mode, and broadcast mode |
| Option C | strict mode, broadcast mode, and VRF mode |
| Option D | broadcast mode, loose mode, and VRF mode |
| Correct Answer | A |
| Question ID 7680 | What does the following access list, which is applied on the external interface FastEthernet 1/0 of the perimeter router, accomplish? router(config)#access-list 101 deny ip 10.0.0.0 0.255.255.255 any log router (config)#access-list 101 deny ip 192.168.0.0 0.0.255.255 any log router (config)#access-list 101 deny ip 172.16.0.0 0.15.255.255 any log router (config)#access-list 101 permit ip any any router (config)#interface fastEthernet 1/0 router (config-if)#ip access-group 101 in |
| Option A | It prevents incoming traffic from IP address ranges 10.0.0.0-10.0.0.255, 172.16.0.0- 172.31.255.255, 192.168.0.0-192.168.255.255 and logs any intrusion attempts. |
| Option B | It prevents the internal network from being used in spoofed denial of service attacks and logs any exit to the Internet. |
| Option C | It filters incoming traffic from private addresses in order to prevent spoofing and logs any intrusion attempts. |
| Option D | It prevents private internal addresses to be accessed directly from outside. |
| Correct Answer | C |