READ Free Dumps For CISCO- 100-105

Question ID 14497	What is the network address for the host with IP address 192.168.23.61/28?
Option A	192.168.23.0
Option B	192.168.23.32
Option C	192.168.23.48
Option D	192.168.23.56
Option E	192.168.23.60
Correct Answer	C

Explanation Explanation: Convert bit-length prefix to quad-dotted decimal representation, then from it find the number of bits used for subnetting you can find previously calculated number of subnets by separating subnets each having value of last bit used for subnet masking Find that your IP address is in which subnet, that subnet's first address is network address and last address is broadcast address. Based on above steps the answer is option C

Question ID 14498	Scenario Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links. You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices. R1 does not form an OSPF neighbor adjacency with R2. Which option would fix the issue?
Option A	R1 ethernetO/1 is shutdown. Configure no shutdown command.
Option B	R1 ethernetO/1 configured with a non-default OSPF hello interval of 25: configure no ip ospf hello-interval 25
Option C	R2 ethernetO/1 and R3 ethernetO/O are configured with a non-default OSPF hello interval of 25; configure no ip ospf hello-interval 25
Option D	Enable OSPF for R1 ethernetO/1; configure ip ospf 1 area 0 command under ethernetO/1
Option F	Answer : B Explanation: Looking at the configuration of R1, we see that R1 is configured with a hello interval of 25 on interface Ethernet 0/1 while R2 is left with the default of 10 (not configured).
Correct Answer	B

Explanation

Previous-Page 1 2. . . 64 65 66 67 68 69 70. . . 142 143 Next-Page

Send email to admin@getfreedumps for new dumps request!!!